Fabric Spreading Machine Applicable To All Kinds Of Knitted Fabric
Scope of application:
Applicable to all kinds of knitted fabric, spandex fabric, fabric,
cloth, shirt cloth, non-woven fabric.
1.)The machine's system uses the PLC touch LCD screen operating
system in Taiwan,
2.) When we are in case of emergency, the emergency stop spreading
the cloth in spreading machine will not be dragged down, to avoid
3.) 40 bit PLC control detection, the system is powerful.
4.) According to the liquid crystal touch control device: simple
equipment, quantity, length, drawing speed and paragraphs.
|Width of cloth||2100mm|
|Fabric Weight||bolt fabric: max 100kg|
|Batching diameter||450mm max|
|Spreader speed||85m/min max|
|Spread cloth height||single:25mm max|
1.) Can adjust the distribution of the arc effectively flattening
2.) Multiple automatic dial system is an effective solution to the
cloth cloth fabric with Lycra fabric.
3.) Automatic cloth tension rod type adjustment system tension,
regulation and stability.
1.) Emergency stop device: on both sides of the cutting bed is
provided with a stop with a cable, can at
any time in the cutting bed any position of the cable is pulled for
2.) Automatic lifting device can be set up: the fabric thickness,
3.) Automatic edge device of electric eye: in order of Rab
operation process can be done automatically on
the right side
4.) Cloth tail sensor device: when the fabric is finished, the
control machine automatically stops running,
and automatically drive back to the fixed point.
5.) Distribution device: with fabric width and tension distribution
of effective adjustment, the spreading
without wrinkles phenomenon.
6.) Folding fabric device: can be used for one-way and round-trip
7.) Cutting device: cloth cutting knife can be set according to
width of the walking distance and cutting
1. How long is the delivery time?
For standard machines, it would be 15 days; For non-standard
machines and customized machines
according to clients specific requirements.
2. I want a size that you don’t make as standard, is this possible?
Absolutely, we can design and manufacture any size our clients